$27.50 $55.00
  • Revision:2006 Edition, February 28, 2006
  • Published Date:January 2014
  • Status:Active, Most Current
  • Document Language:English
  • Published By:Scaffold & Access Industry Association (SAIA)
  • Page Count:40
  • ANSI Approved:Yes
  • DoD Adopted:No

  • Equipment Covered. This standard applies tomanually propelled, integral chassis aerial platforms having aplatform that cannot be positioned completely beyond the base andare used to position personnel, along with their necessary toolsand materials, at work locations. Platforms are adjustable bymanual or powered means and shall not be occupied when movedhorizontally. (See Figure 1 for examples.)

    Effective Dates. The standard will becomeeffective August 28, 2006 as follows:

    (1) Design, manufacture, and remanufacture requirements. Thedesign and manufacturing requirements of this standard will applyto all aerial platforms manufactured on or after the effectivedate. Aerial platforms remanufactured on or after the effectivedate of this standard shall comply with the requirements of thisstandard.

    (2) Rebuild/recondition requirements. Rebuilt/reconditionedaerial platforms shall comply with the standard in effect as of thedate of their original manufacture.

    (3) Responsibilities for dealers, owner's users, operators,lessors, lessees, and brokers. All provisions detailed for dealers,owners, users, operators, lessors, lessees, and brokers apply toboth new and existing units delivered by sale, lease, rental or anyform of beneficial use on or after the effective date.

    Equipment Not Covered. This standard does notapply to the equipment listed below:

    (1) Ladder and ladder stands such as those covered in AmericanNational Standards for Ladder and Ladder Stands, ANSI A14Series

    (2) Scaffolding such as those covered in American NationalStandard for Construction and Demolition Operations ScaffoldingSafety Requirements, ANSI A10.8-1988

    (3) Vehicle-mounted elevating and rotating aerial platforms suchas those covered in American National Standard for Vehicle- MountedElevating and Rotating Aerial Devices, ANSI/SAIA A92.2-2009

    (4) Self-propelled elevating aerial platforms such as thosecovered in American National Standard for Boom-Supported ElevatingWork Platforms, ANSI A92.5- 2006 (R2014)

    (5) Self-propelled elevating aerial platforms such as thosecovered in American National Standard for Self-Propelled ElevatingWork Platforms, ANSI/SAIA A92.6- 2006 (R2014)

    (6) Safety requirements for airline ground supportvehicle-mounted vertical lift devices, American National Standardfor Airline Ground Support Vehicle-Mounted Vertical Lift Devices;ANSI/SAIA A92.7- 2014

    (7) Vehicle-Mounted Bridge Inspection and Maintenance Devices,ANSI/SAIA A92.8- 2012

    (8) Mast Climbing Work Platforms, ANSI/SAIA A92.9-2011

    (9) Suspended powered platforms for exterior buildingmaintenance, ANSI A120.1-1992

    (10) Vertically adjustable equipment used primarily to raise andlower materials and equipment from one elevation to another such asAmerican National Standards in the A17 B30 and B56 series

    (11) Fire-fighting equipment such as that covered in AmericanNational Standard for Automotive Fire Apparatus, ANSI/NFPA1901-1991

    (12) Construction and demolition operation digger derricks suchas those covered in American National Standard for Construction andDemolition — Safety Requirements, Definitions and Specifications,ANSI A10.31-1995

    Purpose. This standard applies to manuallypropelled elevating aerial platforms to achieve the followingobjectives:

    (1) Prevention of personal injuries and accidents

    (2) Establishment of criteria for design, manufacture,remanufacture, rebuild/recondition, testing, performance,inspection, training, maintenance and operation

    (3) Establishment and understanding by designers, manufacturers,dealers, owners, operators, users, lessors, lessees, and brokers oftheir respective responsibilities