$22.50 $45.00
  • Revision:6th Edition, 2006
  • Published Date:January 2011
  • Status:Active, Most Current
  • Document Language:English
  • Published By:Scaffold & Access Industry Association (SAIA)
  • Page Count:50
  • ANSI Approved:Yes
  • DoD Adopted:No

  • Equipment covered. This Standard applies tomobile units capable of positioning a platform alongside or beneatha bridge deck or equivalent structure while being supported fromsuch structure and are used to position personnel, along with theirnecessary tools and materials, at work locations. Typical examplesof this type of equipment are shown in Figure 1 on page 48.

    Equipment not covered. The scope of thisstandard does not include the following equipment: Ladder andladder stands such as those covered in American National Standardsfor Ladder and Ladder Stands, ANSI A14 series

    Scaffolding such as those covered in American National Standardfor Scaffolding Safety Requirements, ANSI A10.8-2001

    Vehicle and trailer mounted Elevating and Rotating Mobile unitssuch as those covered in American National Standard for theVehicle-Mounted Elevating and Rotating Aerial Devices, ANSI/SIAA92.2-2009

    Non-self-propelled elevating mobile unit such as those coveredin American National Standard for Manually Propelled ElevatingAerial Platforms, ANSI/SIA A92.3- 2006

    Self-propelled elevating mobile units such as those covered inAmerican National Standard for Boom- Supported Elevating WorkPlatforms, ANSI/SIA A92.5- 2006 and Self-Propelled Elevating WorkPlatforms, ANSI/SIA A92.6-2006

    Vehicle-mounted vertical lift devices such as those covered inAmerican National Standard for Airline Ground SupportVehicle-Mounted Vertical Lift Devices, ANSI/SIA A92.7-1990(Reaffirmed 1998)

    Mast climbing work platforms such as those covered in AmericanNational Standard for Mast Climbing Work Platforms, ANSI/SIAA92.9-2011

    Suspended powered platforms for exterior building maintenancesuch as those covered in Suspended Power Platforms for ExteriorBuilding Maintenance, ANSI A120.1-2008

    Vertically adjustable equipment used primarily to raise andlower materials and equipment from one elevation to another as inANSI A17, B30, and B56 series Fire fighting equipment such ascovered in Automotive Fire Apparatus ANSI/NFPA 1901-2009

    Construction and demolition digger derricks such as thosecovered in American National Standard for Construction andDemolition Safety Requirements, Definitions, and Specifications,ANSI A10.31-2006

    Mobile and Locomotive Truck Cranes, ANSI/ASME B30.5-2007 withSupplements "A" and "B" Personnel carrying attachments associatedwith cranes such as those covered in ANSI/ASME B30.23-2005Personnel Lifting (platforms attached to the crane boom orsuspended by hooks).

    Purpose. This Standard applies to theestablishment of criteria for design, manufacture, remanufacture,rebuild/recondition, testing, inspection, installation,maintenance, use, training, and operation of Vehicle- MountedBridge Inspection and Maintenance Devices, primarily used toposition personnel, to achieve the following objectives:

    (1) Prevention of personal injuries and accidents;

    (2) Establishment of criteria for design, manufacture,remanufacture, installation, rebuild/recondition, testing,performance, inspection, training, maintenance, and operation;

    (3) Establishment and understanding by designers, manufacturers,remanufacturers, installers, dealers, owners, users, operators,lessees, lessors and brokers of their respectiveresponsibilities.

    Effective Dates. This Standard will becomeeffective September 5, 2012 as follows:

    (1) Design, manufacture and remanufacture requirements. Thedesign and manufacturing requirements of this Standard will applyto all mobile units manufactured on or after the effective date.Bridge Inspection and Maintenance Devices remanufactured on orafter the effective date of this Standard shall comply with therequirements of this Standard.

    (2) Rebuilt/reconditioned Bridge Inspection and MaintenanceDevices shall comply with the standard in effect as of the date oftheir original manufacture.

    (3) Installation Requirements. The installation requirements ofthis Standard apply to all Bridge Inspection and MaintenanceDevices installed on or after the effective date.

    (4) Responsibilities for installers, dealers, owners, users,operators, lessors, lessees, and brokers. All provisions detailedfor dealers, owners, users, operators, lessors, lessees, andbrokers apply to both new and existing units delivered by sale,lease, rental, or any form of beneficial use on or after theeffective date.